BZMCD - CANON EX
- MSDS: BZMCD
- Manufacturer: ASPEN IMAGING INTERNATIONAL INC
- Product Name: CANON EX
- National Stock Number: 6850-00N064763
Product Identification
Product ID:CANON EX
MSDS Date:06/15/1993
FSC:6850
NIIN:00N064763
MSDS Number: BZMCD
Responsible Party
LAFAYETTE, CO 80026-9300
US
Emergency Phone: 800-955-5555
Info Phone: 303-666-5750
Cage: 65521
Contractor
Telephone: 800-955-5555
Cage: 65521
Ingredients
STYRENE ACRYLATE COPOLYMER;(STYRENE/ACRYLIC COPOLYMER
CAS: 25153-46-2
OSHA PEL N/K
ACGIH TLV: N/K
IRON OXIDE
CAS: 1317-61-9
OSHA PEL 10 MG/M3
ACGIH TLV: 5 MG/M3
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5MG(FE)/M3FUME,B2
PROPENE POLYMERS;(POLYOLEFIN)
CAS: 9003-07-0
RTECS: TR5000000
OSHA PEL N/K
ACGIH TLV: N/K
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
DYE;(METAL COMPLEX DYE)
CAS: 31714-55-3
OSHA PEL N/K
ACGIH TLV: N/K
AMORPHOUS SILICA
CAS: 112945-52-5
RTECS: VV7310000
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: EXPOSURE UNDER NON-DUSTY
CONDITIONS SHOULD NOT CAUSE ANY SIGNIFICANT HEALTH EFFECT. UNDER
DUSTY CONDITIONS, IRRITATION MAY OCCUR W/SOME ACCUMULATION OF TONER
DUST IN NOSE & THROAT. EYE: TONER DUST MAY CAUSE CONJUNCTIVAL
IRRITBUT NO CHEMICAL IRRIT/DMG TO EYE/PARTS. INGEST: ACCIDENTAL
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:INGEST OF TONER MAY CAUSE NAUS.
CHRONIC:RPTD INHALATION OF HIGH CONCENTRATIONS OF TONER HAS CAUSED
LUNG EFFECTS AND DAMAGE IN LAB ANIMALS. BASED ON THESE STUDIES
EXCESSIVELY DUSTY CONDITIONS SHOULD BE AVOIDED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: IMMEDIATELY FLUSH W/LGE AMOUNTS OF WATER FOR AT LEAST
15 MINUTES, OCCASIONALLY LIFTING UPPER & LOWER EYELIDS. IF EYE
IRRITATION DEVELOPS, SEEK MEDICAL ATTENTION. SKIN: WASH W/SOAP &
WATER TO REM OVE. INHAL: REMOVE TO FRESH AIR. SUPPORT
BREATHING(GIVE O*2/ARTF RESP). INGEST: CALL MD IMMEDIATELY.
Fire Fighting
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT. AVOID INHAL OF SMOKE. COOL FIRE EXPOSED
CONTAINERS W/WATER SPRAY.
Unusual Fire/Explosion Hazard:AS W/ALL COMBUST MATLS IN FINELY DIVIDED
STATE, EXTREMELY HIGH CONCS IN AIR MAY CREATE AN EXPLOS MIX.
ELIMINATE SOURCES OF IGNITION.
Accidental Release
Spill Release Procedures:LOOSE TONER MAY BE VACUUMED OR SWEPT. RESIDUE
MAY BE REMOVED WITH SOAP & WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID RPTD/PRLNGD INHALS OF EXCESS
DUST. DO NOT TAKE INTERNALLY. AVOID CONT W/SKIN, EYES & CLTHG.
STORE IN COOL, DRY, WELL-VENT AREA. DO NOT INCIN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHEN USED AS INTENDED IN PRINTER
EQUIPMENT.FOR USE OTHER THAN NORMAL OFFICE PRINTER, OPERATING
PROCEDURES (SUCH AS IN BULK TONER PROCESSING FACILITY) NIOSH/MSHA
APPROVED RESPIRATORS MAY BE REQUIRED IF UNDER DUSTY CONDITIONS.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:1.3-1.5
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER W/FAINT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:ABNORMALLY HIGH AIRBORNE CONCS OF DUST CAN
PRESENT THE POSSIBLITY OF AN EXPLOSION IF AN IGNITION SOURCE IS
PRESENT.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.
Disposal
Waste Disposal Methods:REMOVE TO AN APPROVED LANDFILL SITE & DISPOSE OF
IN ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.